 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MCR218-2, MCR218-4, MCR218-6 Preferred Device Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half-wave silicon gate-controlled, solid-state devices are needed. * Glass-Passivated Junctions * Blocking Voltage to 400 Volts * TO-220 Construction -- Low Thermal Resistance, High Heat Dissipation and Durability * Device Marking: Logo, Device Type, e.g., MCR218-2, Date Code MAXIMUM RATINGS (TJ = 25C unless otherwise noted) Rating Peak Repetitive Off-State Voltage(1) (TJ = to 125C, Gate Open) MCR218-2 MCR218-4 MCR218-6 Symbol VDRM, VRRM 50 200 400 IT(RMS) ITSM 8.0 100 A A 1 Value Unit Volts 4 http://onsemi.com SCRs 8 AMPERES RMS 50 thru 400 VOLTS G A K *40 On-State RMS Current (180 Conduction Angles; TC = 70C) Peak Non-repetitive Surge Current (1/2 Cycle, Sine Wave 60 Hz, TJ = 125C) Circuit Fusing Considerations (t = 8.3 ms) Forward Peak Gate Power (Pulse Width 1.0 s, TC = 70C) Forward Average Gate Power (t = 8.3 ms, TC = 70C) Forward Peak Gate Current (Pulse Width 1.0 s, TC = 70C) Operating Junction Temperature Range Storage Temperature Range 2 3 I2t PGM PG(AV) IGM TJ Tstg 26 5.0 0.5 2.0 - 40 to +125 - 40 to +150 A2s Watts TO-220AB CASE 221A STYLE 3 PIN ASSIGNMENT Watts A C C 1 2 3 4 Cathode Anode Gate Anode ORDERING INFORMATION Device Package TO220AB TO220AB TO220AB Shipping 500/Box 500/Box 500/Box (1) VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. MCR218-2 MCR218-4 MCR218-6 Preferred devices are recommended choices for future use and best overall value. (c) Semiconductor Components Industries, LLC, 1999 1 March, 2000 - Rev. 2 Publication Order Number: MCR218/D MCR218-2, MCR218-4, MCR218-6 THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Maximum Lead Temperature for Soldering Purposes 1/8 from Case for 10 Seconds Symbol RJC TL Max 2.0 260 Unit C/W C ELECTRICAL CHARACTERISTICS (TJ = 25C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit OFF CHARACTERISTICS Peak Repetitive Forward or Reverse Blocking Current (VAK = Rated VDRM or VRRM, Gate Open) TJ = 25C TJ = 125C IDRM, IRRM -- -- -- -- 10 2.0 A mA ON CHARACTERISTICS Peak Forward On-State Voltage(1) (ITM = 16 A Peak) Gate Trigger Current (Continuous dc) (VD = 12 V, RL = 100 Ohms) Gate Trigger Voltage (Continuous dc) (VD = 12 V, RL = 100 Ohms) Gate Non-Trigger Voltage (Rated 12 V, RL = 100 Ohms, TJ = 125C) Holding Current (VD = 12 Vdc, Initiating Current = 200 mA, Gate Open) VTM IGT VGT VGD IH -- -- -- 0.2 -- 1.5 10 -- -- 16 1.8 25 1.5 -- 30 Volts mA Volts Volts mA DYNAMIC CHARACTERISTICS Critical Rate-of-Rise of Off-State Voltage (VD = Rated VDRM, Exponential Waveform, Gate Open, TJ = 125C) (1) Pulse Test: Pulse Width = 1.0 ms, Duty Cycle 2%. dv/dt -- 100 -- V/s http://onsemi.com 2 MCR218-2, MCR218-4, MCR218-6 Voltage Current Characteristic of SCR + Current Anode + VTM on state IRRM at VRRM IH Symbol VDRM IDRM VRRM IRRM VTM IH Parameter Peak Repetitive Off State Forward Voltage Peak Forward Blocking Current Peak Repetitive Off State Reverse Voltage Peak Reverse Blocking Current Peak On State Voltage Holding Current Reverse Blocking Region (off state) Reverse Avalanche Region Anode - + Voltage IDRM at VDRM Forward Blocking Region (off state) TC , MAXIMUM ALLOWABLE CASE TEMPERATURE ( C) P(AV), AVERAGE ON-STATE POWER DISSIPATION (WATTS) 125 15 115 = CONDUCTION ANGLE 12 = Conduction Angle 120 180 60 = 30 90 dc 105 9.0 95 dc = 30 0 1 2 6.0 85 75 60 3 90 120 4 180 5 6 7 3.0 0 0 1.0 2.0 3.0 4.0 5.0 6.0 IT(AV), AVG. ON-STATE CURRENT (AMPS) 7.0 8.0 8 IT(AV), AVERAGE ON-STATE FORWARD CURRENT (AMPS) Figure 1. Current Derating Figure 2. On-State Power Dissipation http://onsemi.com 3 MCR218-2, MCR218-4, MCR218-6 I GT , NORMALIZED GATE TRIGGER CURRENT (mA) V GT , NORMALIZED GATE TRIGGER VOLTAGE 3.0 2.0 VD = 12 Vdc 1.5 1.0 0.9 0.7 0.5 0.4 0.3 -60 -40 -20 0 20 40 60 80 100 120 140 1.3 1.2 VD = 12 Vdc 1.0 0.9 0.7 0.5 0.4 0.3 -60 -40 -20 0 20 40 60 80 100 120 140 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) Figure 3. Typical Gate Trigger Current versus Temperature Figure 4. Typical Gate Trigger Voltage versus Temperature I H , NORMALIZED HOLDING CURRENT (mA) 4.0 3.0 2.0 VD = 12 Vdc 1.5 1.0 0.9 0.7 0.5 0.4 -60 -40 -20 0 20 40 60 80 100 120 140 TJ, JUNCTION TEMPERATURE (C) Figure 5. Typical Holding Current versus Temperature http://onsemi.com 4 MCR218-2, MCR218-4, MCR218-6 PACKAGE DIMENSIONS TO-220AB CASE 221A-07 ISSUE Z -T- B F C SEATING PLANE T S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 CATHODE ANODE GATE ANODE MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.36 0.55 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04 4 Q 123 A U K H Z L V G D N J R STYLE 3: PIN 1. 2. 3. 4. http://onsemi.com 5 MCR218-2, MCR218-4, MCR218-6 Notes http://onsemi.com 6 MCR218-2, MCR218-4, MCR218-6 Notes http://onsemi.com 7 MCR218-2, MCR218-4, MCR218-6 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 1:00pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 1:00pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 12:00pm to 5:00pm UK Time) Email: ONlit@hibbertco.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, England, Ireland CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5740-2745 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 8 MCR218/D |
Price & Availability of MCR218-2
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |